 |
one step cement |
Minimal to no postoperative sensitivity
seT does not require separate etching and washing. The smear layer remains intact to protect the tooth. This dramatically reduces, if not eliminates post-operative sensitivity.
Dual cure
seT is light cured, and self cured. The material hardens in 5 minutes by itself, or just 20 seconds with the aid of a curing light.
Super fluoride release!
The proprietary glass formulation in seT has been specifically designed to release a consistently high dose of fluoride over a prolonged period of time. It serves as a caries preventative system by providing continuous replenishment of fluoride to the oral environment.
Anatomical stability
seT rapidly equilibrates to a stable slight weight increase. This means that seT still maintains its anatomical form compared to some products which actually lose mass over time.
Radiopacity
Detectible on x-ray radiographs, seT is great for recalls when margins are regularly checked for integrity.
Film thickness
seT produces an ideal film thickness (17µm) and fluidity to seat cemented restorations.
| |
Fast and easy
seT is an all in one luting cement. It etches, bonds and fills with just the one component. Simply apply seT and seat your prosthesis.
Resistance to dissolution
seT has been formulated using proprietary hydrophobic monomers to give good water resistance in the cured state, whilst still possessing excellent substrate wetting when placed onto a moist bonding surface.
Extensive colour range
seT is available in 5 shades:
Translucent, A1, A2, OA3 and opaque white. The large variety of shades helps maximize esthetics.
More material for your money
seT capsules contain 0.14mL of material, as opposed to the alternative of 0.10mL.
Indications | inlays | | onlays | | crowns | | bridges | | posts and screws | | Ceramic, metal and composite prosthesis |
|
INSTRUCTIONS
1. Remove temporary cement residue and rinse thoroughly
2Remove excess water, keep moist
3. Prepare prosthesis according to manufacturer’s instructions, and check fit
4. Activate capsule and mix in amalgamator for 10 seconds
| |
5. Apply "seT" to bonding surfaces
6. Seat prosthesis
7. Clean up excess (tack cure for 2 seconds or wait 2 minutes)
8. Light cure for 20 seconds or allow to self-cure (5 minutes)
|
References:
(1) SDI Test Data
(2) Source: Al-Naimi O.T., McCabe J. F. Fluoride release of seT self-etch/self-adhesive resin cement with that of Competitor Products. (18 months report) Newcastle University, U.K. February 2007.
(3) Data on file.
* Maxcem, Relyx Unicem and Aplicap are not the registered trademarks of SDI limited.
|
|
