Lowest viscosity, deepest penetration

Lowest viscosity

Conseal Clear is the lowest viscosity sealant. The ideal low viscosity allows Conseal Clear to flow faster and deeper into the prepared pits and fissures. A recognized cause of pit and fissure sealant failure is an inability to seal. The tighter seal optimizes Conseal Clear’s mechanical retention and eliminates the space required for bacteria to grow.

Conseal Clear’s tight seal is further enhanced by its unique UDMA resin system’s lower shrinkage and by being BIS-GMA free, avoiding the controversy of Bisphenol A.

Low viscosity Super Etch LV

SDI has created a specialized blue gel 37% phosphoric acid etchant for sealants, in a direct delivery system. Super Etch LV’s lower viscosity improves the acid’s surface contact for deeper etchant penetration into the pits and fissures. The deeper acid penetration strengthens the mechanical bond and the retention success of Conseal f sealants.

Clinically proven

Conseal pit and fissure sealants are clinically proven. 5,363 Conseal sealants placed in 774 children found no failures due to the material and established that ”sealants contribute significantly to dental public health”.(1)

Bio compatible

Conseal Clear’s low water solubility minimizes breakdown of the sealant in the oral environment.

Tip size comparison**

Conseal Clear’s syringe and complet tip diameter opening is only 0.41mm; significantly smaller than the alternatives of 1.5mm or 1.3mm.

Conseal Clear syringe

(1) Messer LB, Calach H, Morgan MV (1997). The retention of pit and fissure sealants placed in primary school children by Dental Health Services, Victoria. Australian Dental Journal 42:(4);223-239.

* Delton Plus and Helioseal F are not the registered trademarks of SDI Limited.

For detailed instructions please click here to download pdf.

1. Clean and isolate the tooth.

2. Etch tooth surface with Super Etch LV for at least 30 seconds, no more than 60 seconds.

3. Wash thoroughly with water.

4. Completely dry tooth.
Note: a dry field is essential for the following steps.

5. Directly inject or brush apply Conseal clear pit and fissure sealant
6. Light cure Conseal clear for 20 seconds.

CAUTION: Ensure the dispensing tip hub is firmly attached to the Super Etch and Conseal Clear syringe by twisting the hub securely onto the syringe

 

Conseal clear syringe kit

  • 4 x 1g Conseal clear syringes
  • 20 single use disposable (27 gauge) tips

7850016

 

Conseal bottle kit (light grey)

  • 2 x 5.5g (5mL) light grey conseal sealant
  • 1 x 18.75g (15mL) acid etcant gel

7850001

 

Conseal bottle refill (clear)

  • 5.5g (5mL) clear conseal sealant

7850003

 

Conseal bottle refill (light grey)

  • 5.5g (5mL) light grey conseal sealant

7850004

 

Complet applicator

  • 1 x Complet applicator

5545008

 

Super Etch LV bulk kit

  • 10 x 1.25g (1mL) Super Etch LV syringes
  • 40 single use disposable tips

8100044

 

Disposable tips for Conseal f and Super Etch LV syringes

  • 20 single use disposable tips

8100061

 

Instructions

We keep an up-to-date archive of all our product instruction sheets.

SDS

We keep an up-to-date archive of all our safety data sheets.

Brochures

Download and view brochures for the entire range of SDI products.

Image Library

Download and view our products image collections